FLOW-MON

Flow-Mon

A scaled dial and mechanical indicator that continuously monitors the flow rate at any given time, with electrical switches that can be specified to signal when a particular level has been reached during increasing or decreasing flow rates.

Style

Through its unique modular design, it allows for easy field installation and service. It does not require any straight pipe runs before or after the monitor, thus minimising the installation footprint. The versatile design of the vane monitor allows for orientation to be mounted in any position. The vane style monitor operates when flow is introduced through the inlet connection, making direct contact with the vane that is mechanically linked to the indicator shaft. The monitor is spring loaded and allows the vane to return on decreasing flows.

Switches

All switches are field-adjustable, suitable for batching, trending, totalising or recording where required. All Flow-Mon units can be supplied with a 0-10v or 4-20mA output.

Sizes

All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and / or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application - ie. the maximum scale reading coincides with the maximum requirements of the system as specified by the customer. Calibration may be in any units with Single or Dual scale to specification.


Datasheets

Share by: